Title: Bictory By Mwahaha91
spinofdoom - June 29, 2006 08:29 AM (GMT)
Can somebody tell me how to make a BICtory?
Related Topics:
- BICtory vs Comssa
- What is a BICssa?
- BIC Help
- Why BICtory?
Related Topics:
- BICtory vs Comssa
- What is a BICssa?
- BIC Help
- Why BICtory?
sketching - June 29, 2006 04:31 PM (GMT)
Here is mwahaha91's original tutorial...
| QUOTE (mwahaha91 @ Thu Jun 16 @ 2005 4:49 am) |
| OH geez, i just lost all motivation after seeing DarkArcher's mod -_-. But anyways: *Introduction This is my new BICtory mod. It is made using 2 bic round stic pens. I came up with the idea of making this mod when my parents told me my mods were way too expensive. Bic round stics are VERY cheap and can be found virtually anywhere. So through hours and hours of hard work, I came up with the BICtory mod. I named it the BICtory mod because I felt victorious after the finishing product lol. Kinda cheesy, but I like it. Razz *Requirements You will need: - 2 BIC round stics - (OPTIONAL) 1 signo gel grip You will also need: - Either scissors or a nail clipper - A skinny stick or skinny chopstick  *Procedure 1. Start off by taking both caps off the bic round stics, and clipping off the clip with the nail clipper or scissors. You can break the clip by hand if needed. There is no need to file the remaining part.   2. Next, take off the front part of the pen on both bic round stics as shown.  3. Then using your chopstick, puncture out the back plug of either one of the bic round stic bodies.  4. After that, clip off 7 mm of both ink tubes off. This will allow the ink tubes to fit later when the double sided mod is done. 5. Almost there! Now take a ink tube and insert it into one side of the bic round stic body that had the plug taken out. After, take the other ink tube and slide it in into the other side. Lastly, take both caps and stick them on.   (OPTIONAL) 6. This part requires the use of a grip from the signo gel series. I chose to use this grip, because I use the tip of the signo series for a lot of different mods, but the grip is untouched. So I decided to use a signo gel grip for this part because I know that a lot of different members in UPSB have signo gel grips lying around. All there is to do is, remove the grip from the body, cut the grip in half, then stick one half on each cap. And then you are completely done! *Comments This mod is not limited to the black and white colors that I chose. You can also use red, blue, or even green! Even though I used the signo gel grip, other grips can be substituted for example, anyball grip, HGG grip, RSVP grip. The possibilities are endless! Through spinning this pen, I have concluded that this pen has properties that rival the zebra 3000*F. It spins exceptionally well, it is relatively light, it is perfectly balanced, and is as durable as a rock. As for the price of the pen, a bic round stic costs 5cents each, and a signo gel grip costs $1.30 each. So the total price of the pen is $1.40 which is really cheap! |
Eburt - August 24, 2006 09:19 PM (GMT)
portablewaffle - November 17, 2006 11:09 PM (GMT)
Is there another way to take the other end out? The only thing I have that fits through the barrel of the pen is another pen and I can't apply enough force to take the thing off. Would burning / boiling it help?
Petahpie - November 17, 2006 11:48 PM (GMT)
use the hammer mod portablewaffle. just hit the back of it a couple times with a hammer and take out the remaining pieces with a nail. I posted about this in one of the stickys (mod q&a or somthing). read it.
and back on topic, I've never used a comssa but I am in love with my softfeel bictory with easytouch grips (shivers with glee).
and back on topic, I've never used a comssa but I am in love with my softfeel bictory with easytouch grips (shivers with glee).
sketching - November 18, 2006 05:39 AM (GMT)
The BIC Help thread has plenty of conversation about how to remove the back.