Take two Pentel HGG...

Cut where grip ends... Take ink tube, clean it up , crimp it in a bunch of places and fit inside both HGG's... Don't forget to sand the cut areas.

Spin away! Also use transparent tape or other tape to mark COP? Use Comssa caps, Rushon, RSVP, HGG caps for double tip...

Can't get a picture now. It's real easy to make since everyone has HGG lying around after taking the grip off. KK.

"Cut where grip ends... Take ink tube, clean it up , crimp it in a bunch of places and fit inside both HGG's... Don't forget to sand the cut areas."

I dont really understand that... what does "crimp" means? you know, me = panamanian girl, that doesnt know too much english. XD.

Without a pic its hard to guess exactly what your saying.

I will try later. I have a assload of HGG Bodys and Inks.

You mean empty the ink tube then crimp it up?

Why in the world would you need to crimp the ink tube?

to crimp is to, you know how theres a little bump on retractable pens? Do that.

Basically it's two hggs put together by the inktube, but you cut the whole part where the grip used to be, so the pen is flush.

Sounds like someone got a little high and basically f*** up his HGG's on some odd-ball mod lol.

Dude, did you type this tut. in like 2 mins? I don't know which was faster, making the mod, or the tut. LOL. Anyways, ok mod I suppose, but it doesnt write and is a little basic, and my HGG wouldn't work for this mod, ask Kavondak why...


Not to flame, try to modify it by taking out the back plugs on both sides so you can stick the ink tube through that way so you can still write. B)

Kinda like this crappy ass mod except it's shorter and the pens are put together differently and it doesn't suck as much.'

Actually I don't get it, how are the HGGs put together?

There is the damn pen...

I compare it to HGG Comssa and MX.


You have to crimp (bend the ink tube with tweezers or pliers or something) the ink tube so that the two HGG parts can stay together, sorry. I had to go real quick.

Anyway, I've found that transparent tape works better... And that Comssa caps work fairly well... That's why HGG VX... And you can tip it and everything... If you can find an inktube or something that is the RIGHT size to get the two HGG pieces together it will make it perfect... So far I've only tried crimping the ink tube like I said or using very clear tape. Good luck!

Hey! I r understandable your tuts now!!!!!!!!

So, you just pull the tip on the inktube off too right? then you gonna tape the inktube to make it thicker. Woooo!!! I r Understood America!!!!!!

Your mod > HGG Comssa
or it could be like a better version of it.
Just add comssa cap! So easy!

Thanks for pwning or helping Mr.LSC HGG Comsssssssaaah!

lol no... you clean otu the inktube, you crimp it, or wait i guess you COULD put tape on the inktube itself to make it big enough so it doesnt move, mm im gonna try that

and no problem, i r understood america too

and... i dunno about regular hgg comssa with the g2 barrel.. its pretty good too

oh well

have fun with the mod guys

eh never liked VX connections. never really felt that stable

What about your fushion MX? Its basiclly the same idea. BTW, I failed to mod a Fushion MX when i tried, couldn't get the darn INktube into the retrable barrel.

I tried with ComSsa Caps somewhat with 23 cm but super weak in the middle.

lolz its in the process

i gotta find a good inktube that can support it like VX

everyone is better off sanding down hgg and putting g2 barrel on there, spin away!