ya so a couple days ago i dug deep into my pencil case and found a non spinning pen the bic atlantis and i thought i should use he weird clicker thingy for something so i came up with my first mod heres a brief guide

parts:
bic atlantis (clicker part)
rsvp (whole pen except grip)
HGG ( grip and tip)
weird transparent bic pen i ono wut its called

1. take ur RSVP saw off the front part so that the RSVP ink tube can fit through
2. screw on the HGG tip to the from of the cut RSVP and put the grip on
3. ake ur bic atlantis clicker and open it up until you get a longer part and a small ring
4. remove the backcap of the rsvp
5. take some sand paper and sand down the inside until around half of the small ring from the Bic atlantis can fit.
6. take the ink tube and pinch it with pliers where the srping is gonna be (u kno wut im talking bout)
7. cut the inktube to the right length.
8. put the spring and the ink tube inside and pen.
9. put some masing tape on the end of the bic atlantis clicker
10 t=saw the smaller end of the bic pen and place it on the bic atlantis clicker thingy
11. glue the small ring of the bic atlantis clicker to the sanded part of the back of the RSVP
12. let it dry
13. put the RSVP cap over the bic pen and oush it in harder so it stays.

thaz bout it i think...

btw this si like the HG3R its the twist its not a clicker on yet...

and heres some pics

the pen: http://www.putfile.com/pic.php?img=4534195

balance: http://www.putfile.com/pic.php?img=4534193

besides a regular mx: http://www.putfile.com/pic.php?img=4534191

balance vs mx. http://www.putfile.com/pic.php?img=4534194

ink tube out: http://www.putfile.com/pic.php?img=4579718

okay just a few things the bond between the bic atlatis ring and the RSVP is weak so dont press 2 hard if you ever decide to write with this

would apprieciate no flames its my first mod and i would like some suggestions and stuff.

How heavy is this compared to the MX?

my scale is old and the needle is bend so im guessing its round 18 - 20 grams im not sure wut the weight fro a mx is

Pretty good, are Atlantis available in America?

ya heres a link to it from staples http://www.staples.com/webapp/wcs/stores/s...1:CG11:CL110000

pretty nice mod.
i'd like to see it plz ^^
i'll give more comments after i see it
lol
too lazy to read all that

Looks like a nice pen mod :)

Could you be a little more specific on step 3? How do you take that piece apart?

Sounds pretty good.

Looks good as well

Looks pretty good. There are a couple of things I see wrong with this. The tutorial is too vague. The more detail added the more people will understand, and the more professional the product the end reader will create.

Also I am assuming that you need to take off the RSVP cap to click the pen? That is fine but it does get rather annoying. As you say the clicker portion is weak, which means under constant use you would have to constantly repair the pen.

Don't get me wrong, I am not flaming you, just exposing some of the weak points in the pen. Any of us who have made great mods have gone through this process. Take your Idea and refine it. If you can work on these weak points then this pen will be excellent! Otherwise, GREAT IDEA AND PEN! :clap:

no actually you dont have to take the cap off but its not a clic one its one of the twist and push/pull ill put a better tut l8er

this is a great idea.

nice job on it

one thing i have to point out is that this mod uses GLUE.
we all hate glue. dont use it. please.
(in case you didn't know, glue takes all the moisture out of the plastic in the pen, causing the pen to become very brittle and easily broken. i'm sure many of us cherish the remains of thier first MX, after the tip has broken off.)

please don't take this as flame. i don't mean it in that way.

also, please correct me if i'm wrong and the glue does not do anything to the pen's durablilty.

Only Super Glue takes enough moisture away from the pen to cause it to become brittle. But yes, Do not use glue as it is messy and not a stable thing to use.

Yes I do remember my first MX. I tried to get the plastic off of it, but it just wouldn't come out. :(

oh yeah, i forgot something about the glue.

it also comes off since RSVP barrels are too smooth/the wrong material for any hopes of the glue creating a good stable bond.

i kno about how the suoer glue is bad any everything but this is my first mod and im gonna change it if i have the time :D

Any updates on the new tutorial for this one, quebes? I was actually pretty interested in making it :D