COM . SSA ReVoLuTiOn !!!!!!!!!!!!!!!

Mod Facts

Name: Mp COM.SSA
Length: 18.6cm
Weight: Tiny bit heavier than the comssa mod
COG: Center to the left about 1.2cm
Type: Mechanical Pencil
Difficulty to mod: Medium +

Pen Parts Needed

1.) comssa
2.)any kinds of Mechanical Pencil like the muji無印良品 Mechanical Pencil that i have used
3.)2 hgg refill
4.)any refill that can be inserted into the hgg refill



Pen Part Details

cut it as 5mm length then wrap tape around the barrel


the diameter of those apertures should be bigger then the Mechanical Pencil part



expect this holeXD just same with the lead


Mechanical Pencil part
remove all things except the Mechanical part then glue it(using hot glue) with the hgg refill.after that , insert a refill then overlap another hgg refill(1.9cm) , also wrap tape around it




Chafe the front of the Mechanical Pencil (be careful cause the front part is easily to be broken)
http://i170.photobucket.com/albums/u267/xxg001z/mp2.jpg



Last , overlap those caps and also insert some leads ...
http://i170.photobucket.com/albums/u267/xxg001z/backpart.jpg

Assembly



video:
http://s170.photobucket.com/albums/u267/xx...nt=mpcomssa.flv

Damn sexy :clap:

where can I get the muji無印良品 Mechanical Pencil?
and I dont get the thing with the Mechanical Pencil part... :help:

so the muji mechanical pencil part have a barrel?? Or doesnt it have a barell so I need to glue the hgg reffil on the mechanical metal thing

so a hgg barrel is supposed be over the muji and then I´m supposed to put a little refill in the hgg barrel and then over lap the part of the refill with a another hgg barrel?

and on the body its supposed to have holes on the both sides righht ? :P
well thanks for the tut =D
I´m gonna make one so soon as possible :vhappy:

Would the Bic mech pencil part work????

BTW, where did you get the white coms-sa barrel and translucent commssa cap???
I thought the white barrel was just an outsert but I saw in construction it was just white....

exactly
remove the refill from the mechanical pencil part then glue the hgg one on it then ...... steps by steps
about the muji無印良品 Mechanical Pencil u can buy from muji無印良品

i cant actually guarantee cause i didnt try it before
i really want to trade some bic clic/mech pencil but ..... haha , wt a pity ...
therefore i cant mod the comssa ret. v2 :banghead:
btw , the translucent commssa cap and the white barrel are also from the cartoon comssa , i just remove all the pattern

Mujirushiyouhin (無印良品) can only be found in Japan.

i can found it in hong kong XD

nice mod, but the mechanical pencil is no where to be found in america.

besides that, i don't really like the weighting, but it is a good mod altogether, and writes with PENCIL! btw, you should find out a way to put on an eraser.

Agreed! maybe when you take off the cap, and there's a eraser...that'll be really great!

i couldnt found any size that can be inserted into the hgg refill = =
its jst too small :banghead:

I managed to rig together a mech. pencil rsvp MX. When my comssa's arrive from jetpens i will find a way to make this mod work using a mechanical pencil from north america.

But props to WTH, your mod is sexy :grin: :clap:

maybe you could add an eraser over the hgg refill?
and then make a little hole in the eraser for led to go through
<_<

w8 wtf i didnt understand the tut....dont u have to cut a hole in the back of the comssa also??? cuz it doesnt say that in the tut...and anyone thats made the mod, exactly how long is the lead tube of the muji all extended wit the hgg tube at the end of the whole thing? the only reason for extending it is to make it longer so that the comssa cap can reach it right? :unsure: :dunno: <_<