when i read of the Dr1v37h38u5 Comssa Retr. V2 i was amazed and i quickly made one and one of the problems he noted was that there was an annoying clicking sound when you spun it so i began toying with the pen and found that while sanding down the back cap with an X-acto knife or whatever dont take off the cap struts completely sand them until the HGG metal tip and just barely passs through and then when you put the whole pen together the sound of the clicking mechanism is gone =D

heres Dr1v37h38u5's video of the Comssa Retr. V2 spinning WITH the noise

http://s142.photobucket.com/albums/r110/Dr...nt=MVI_1120.flv

Heres a vid of mine with no sound

http://www.youtube.com/watch?v=71j__EyhejA

i just uploaded it on youtube and it might not show up yet due to them processing it

i hope more people will enjoy this mod as i did and i thank Dr1v37h38u5 for making
such a sweet mod :metal:


I hope this becomes a more popular mod for people even tho it is very difficult to make its defenatly worth the time and effort

heres the origional link for the Comssa Retr. V2

http://z15.invisionfree.com/UCPSB/index.ph...topic=5120&st=0


:clap:

very nice. Video's up now btw. I noticed there's no tip on the other side?

i didnt have another tip haha if i did i would have put one

I dont get it...you never solved the problem. When the pen is out it will still rattle around as you showed in your video.

edit: nvm, i see what you solved, but i believe drivethebus already solved that problem, he said to put some tissue by the back clicker so it wouldn't rattle around and his solution worked.

haha i tried that too but i dont know maybe im being stupid but my tissue fell out hahaha

so yeaaa either way both ways work

=p im just tryin to help people out

Very nice.

nice job.

one problem with the tissue is that the tissue degenerates VERY quickly. After about a week of quiet spinning and writing, the tissue had been ripped to shreds.

anyways, good job. i'm definitly going to do this the next time i make a comssa retr.