Here's a mod I made today.

Parts Needed:
1x Ballsign/Sakura Gelly Roll
2x Comssa Caps (without inserted weight of rolled up paper, etc)
Insert if desired
Tape, Scissors


Steps:
1. Remove the ballsign cap & use it for a ballsign mod or whatever. Use your teeth or pliers & pull out the inktube by the white part. Leave the back cap in.


2. Wrap tape around the front end of the ballsign body until it is the same width as the rest of the tube, then cut off any excess tape sticking over the end with scissors.


3. Put on the ComSsa caps. Note how the balance turned out with the tape, etc. and put weight or cut rsvp grips to the caps to balance it out. You could also make it metallic, etc. The only thing to remember is that there will be less room for weighted material in the back cap, so adjust accordingly.


Finished Product (white insert, compared with dong-a comssa):


It's the same length & width as a normal comssa but slightly lighter in the body, this could be altered with a large amount of rolled up paper in your insert or by adding an inktube (which could probably be done fairly easily)

Hope you enjoy!

Ive done this Mod 2months ago^^ is realy easy to make...

Yeah i didn't think it was too original :rolleyes: I just figured I would write a tutorial for it

I like it...great alternative to the hgg clear comssa mod.

Thanks for posting this, I'll be sure to try it out. :spin:

umm....... and how exactly could u put in an ink tube? I want to use rsvp ink..i dont know how...... :HMMM: :HMMM: :HMMM:

Poke a hole in the back plug and insert the ink tip.

Also, i dont know about ballsign but some Sakura gelly rolls can have the labels taken off with a nickel. Some can't though. I think it's the ones labeled for individual sale, because the one I used had a barcode on it.

yeah i did an idea similar to this
and i posted a tutorial sometime back
nice idea

yea this is a nice mod... and more professional than lostf1r3's no offense to lostf1r3...
only cause it has comssa caps and nicer cut grips =D

We need a comssa-capable thread...

Serious, there are so many possibilities!

lmao i know
plus we just had likea comssa revolution a few weeks ago. so many comssa varitional mods. if that's a word.

Pretty sweet mod, I've had it for about a month and spin it second only to my metallic comssa. If you like heavy mods.. just add HGG tips to the caps, same as a regular comssa. Also, it's pretty sweet that you can add inserts :vhappy: It is a bit lighter than the regular comssa, but the length isn't really noticeable when you're spinning it. Anyway, great mod, thanks. :spin: :spin: :spin:

Hmmm, This is like 5 months old ?