Ok here i a tutorial for my Mod

Pics and tutorial are from Alucard in GPC

1.
Mod a normal Momentum MX withou g2/Hgg Grip part:
-RSVP Grip in the cap
-Take of the back cap of the RSVP, drill a small hole
-Break of the RSVP clip on the cap
-Put Hgg Tip on the front


2.
Now take an arbitrary Comssa cap and drill a hole in the cap



3.
Stick the ComSsa Cap like a normal HGG on the front and now we have a RSVP CS.


Thats not all.You can put some anyball on the ComSsa cap and yet you have a RSVP ACS



Thank you Alucard for the Pictures and the Tutorial

No offense, but the hole kinda seems like a wasted effort. I'd rather use a cap with a hole in it for the comssa retractable than this pen...

^^ but it spins very well

What you mean with the topic name? I just see one Modification.
Edit:
Oh, sorry, now I see the RSVP ACS at the end, :P.

Cool. This was what I wanted to know how to make.

Thanks goes to alucard he made the Tutorial and Pics
i have invented them but i have no more caps for it and i used a messed up RSVP^^

i have only translated to English

i made this mod a while back while i was bored. i almost barfed because of how big of a waste it was.

drilled commsa caps are meant only for Commsa Retractable V2s

HAIL DRIVETHEBUS, HAIL!!! :bowdown:

I was under the impression that an HGG tip could be screwed onto a comssa cap anyways; is that not how a comssa metalic is made?

yes, that is a flaw that could easily be fixed (hint, hint)

You can screw it on the Cap but than you cant put the cap completely over the RSVP Front

Then saw the tip of the RSVP. it is easier than drilling out a commsa cap.

However, there is a little ring in the comssa cap that would prevent it from going all the way over the RSVP even if you sawed some of it off. THAT is the reason for drilling. I just made one and at first I was going to do the same, but that ring is really annoying.

Unless you want to make the pen unbalanced and saw off like 1/2 of the grip part of the RSVP then add mass amounts of tape, it won't work.

Can you give your method for do the hole in the donga's cap plz ?

My method? I cut the nub on the end of the comssa cap where you screw an hgg tip on for a comssa metallic and then I took a scissors and just started to turn it to break everything away. You have to be careful and it takes a long time.

I cracked my comssa cap...

Still good tho.

hehe lol i have done the mod after my cap was cracked^^

yeah I think I used a phillips screw driver to take out the barriers around that piece on the comssa. But hey, it still works. Love the mod dude. Gratz to you and Alucard.

how do you crack a comssa cap?! I've forced caps onto so many mods since i was too lazy to sand parts down and they literally stretch into place...never seen one crack before

it was a metalic comssa cap than the HGG Tip brokes off so i drilled a hole in the cap and sticked it on the RSVP

Need 2hours for do the hole in the cap ^^ (i do the same technique but you post after)

It's very good

you can see my mine in the gif : http://cristalwar.free.fr/singlecaps.gif

So can i post this tuto on the fpsb ?

I made my own version of this... using a Bic cap and a G2 grip



cheap and easy for americans :ilulz:

^^ Pics...

http://strat1227.googlepages.com/IMG_11451.jpg

http://strat1227.googlepages.com/IMG_11461.jpg


Basically the same.... g2 grip and bic round stick cap

im liking that variation strat





...holy shit :ilulz: is an icon now?

Yeah. The head on my screwdriver was too big and I just forced a lot of pressure on those barriers. My hand kinda slipped and it bent the whole cap. I saved it though by taping it together. B)