Mod Facts
Name: COM.SSA Retractable Metallic
Length: 20.2cm
Weight: Same as COM.SSA Metallic without anyball
COG: Center
Difficulty to mod: Hard

1.)comssa
2.)Mitsubishi SH-80 gel pen
3.)Hgg tips x 2 , refill
4.)small little thing of the g-2 clicker part
5.)any other refill

Pen Parts Needed :
nothing special , just like the mp comssa
All Parts

the differents is cut it as 9mm long
Close-up 1

Close-up 2

Mitsubishi SH-80 gel pen part:
cut it as shown in the pic then rub it smaller
Close-up 1
Close-up 2

Back part of the comssa:
like mp comssa one but the Mitsubishi SH-80 gel pen part can be inserted
Close-up

comssa cap :
Close-up 1
Close-up 2

insert the Mitsubishi SH-80 gel pen part
Close-up

g-2 part :
insert the hgg refill so that nothing can be seen outside(pic is wrong XD)
Close-up 1
Close-up 2

ink:
add another refill to increase the Mitsubishi SH-80 gel pen's one to 15.5cm , finish !

Assembly:
Close-up 1
Close-up 2

video:
http://s170.photobucket.com/albums/u267/xx...blecomssav2.flv

three words. what the fuck.

1 question, well actually 2
does the back thing stay together?
and does it make noise?

but... otherwise, nice pictures, tuto please.

where did you get the white CS bodys?
dont know fi i´m gonna make this mod..
the pen u use seems to dont have a mark.
But its a really nice pen B)

i think they're just cartoon comssas with the writing erased
what's that 3rd pen from the top?
it looks like a bic clic but... it's different

It's good, but i dont like the too much sanding and things

i think its the comssa retractable V2 that Dr1v37h38u5 or just the click part is different. other than that i dont see a difference.

hmm
good idea putting the clicker inside the back cap. never thought of that. that helps clean up the mod a ton.

nice job!


differences:
makes the hole in comssa body wider and closer to COG
uses a different retactable mechanism
cuts off the end of the g2 clicker mechanism
widens comssa backcap to house the clicker mechansim
otherwise, i don't see a difference.

this seems to me like a knock off of dr1v3th35u535 mod...
i really can't tell what you're trying to say....
so a tut would be nice before i say anything good or bad.

it seems that u guys think dr1v3th35u535 one is better
so i better not to make a tut

no!
i refuse!
i don't exactly like drivethebus's comssa retractable since mine keeps on falling apart, i'm about to go to ruber cement and super glue, but i think yours will be better since i probably wouldn't fall apart....
so please make a tutorial?

your sexy pics are enough of a tutorial for me :P

Achieves the same thing as dr1v3th35u535 but uses japanese pens (right?)...thats pretty good imo since it allows the mod of a retractable metallic comssa to be more versatile.

exactly.

your mod seems to be much cleaner, ie it doesnt fall apart all the time.

my mod FALLS APART A LOT IF YOU DON'T MOD IT EXACTLY CORRECT. that's why i said new modders shouldn't attempt it.
though it's tough to mod it correctly, as i've made countless tiny ungrades since i posted the tutorial. i really don't know what i've actually done yet, i'll try to see if i can post some more tweaks to optimize the mod. so, if your comssa retr falls apart a lot, then experiment with new ideas and such.
remember, following a tutorial is the beginning, to complete the mod is up to you.

poor tutorial had been written :help:

sweet!
i'm gonna make one of these... once i find one of those mistubishi pens

nice mod.
it is good, i just cant decide between drivethebus's or your's.