REVIEWName of the Pen: Namae Pen Mod
Author: Cwazy Spin
------
Manufacturer: Some taiwan company/uniball/sailor
-Dimensions-
Length (double cap): 18 cm
Length (writing or without cap): 12 cm
Length from COP to ends of pen: dead center with ink and felt tip removed (9cm)
-Properties-
Texture/Material: smooth but has texture, rubber grips on both sides
Grip: yes
Retractable: no
Pens consisted: 2 namae pen 3 sailor gels 2 uniball signo tips or 2 pentel bk83 tips
-Availability-
Location acquired: USA(sailor)(uniball signo/bk83) Japan (namae pen)
Price: 2$/namae 2$/signo $1.50/sailor
Sold in: USA/japan/penwish...lol
-My Rating- (10 is highest 1 is lowest)
Infinity tricks: 8 (tip gets in the way a little)
Sonics: 10
Sonic variations: 10
Balance: 9.5
Shape of pen: 10
Multiple thumbaround: 10
Arounds: 10
Comments:
i love this pen/// it is like a mini kt ////much shorter and much lighter unless you choose to do thai mod which is bk83 tips and that endsup to be heavier than kt. all parts can be bought at penwish .
TUTORIAL
ok so first get all the parts, , , namae pens-signo-sailor

then take the two namae pens and take off the caps. . then take one namae and take out the felt tip (CAREFUL, , its sharpie..it says *you* in chinese so it means its oil based and doesnt come off easy. . ) once the tip is off, pull out the back plug and dump out the ink strip. . . (careful again) do not put anything back...should be just a white shell

then take the signos and then unscrew the tips off. then take the tips and put them into the caps of namae. . . they should fir PERFECTLY. . . so easy
if you wanna do thai mod, , , use bk83 tip

then take your sailor gels (you can choose your perfered colors) and pull the grips off (sometimes hard to get it off and maybe even have to crack the pen) then cut the grips in section of 4-2-8....put grip on a bic cap and use an exacto knife to do it ..YOU HURT YOURSELF< ITS NOT MY PROBLEM..... (the sizes of the grips will vary dur to how heavy you want your pen or how it looks)

so once you have cut the grips, slide them on the end of the caps. . .difficult at times. . . . so you might need some scrength =P.......so once you have put the grips on, , , you can put the tips back.

put the caps back on the empty namae body.. ... the front cap will fit nicely, but the back one, you have to push some to get it stable. and wha-la you have namae mod =))) :vhappy: :vhappy:
oh, and if you want to make this pen a writing mod, , , take the ink of a sailor capped gel pen and slide it into the empty namae body....then take the end plug and cut it about 2cm from the end and push it in the end plug.. . ...... . . this will make the pen .2cm off ballance to the front.
this is a very awesome and fairly easy mod.
i hope this tutorial will help some people make this spinning pen
Thanks all!
Cwazy
you can get all namae mod parts @ penwish.com
if you have any questions, , , ,post em here!