ok so im not realy keen on the RSVP MX BUT i do like it enfough to spin with it so i decided to alter it a bit and make a new double ended MX (if this has already been made sorry im not trying to take credit for it i just want to put my verson out there)

so first you will need: 1 RSVP
and 2 HGG's

1. To begin with just make a normal RSVP MX ( if you dont know how to make one watch this video---> http://www.youtube.com/watch?v=OAwMorS2aTQ
thank you to eso for the exelent video.

2. Once you have made the rsvp you need to remove the RSVP cap and the screw on end bit you no longer need these parts.

3. To make the other end for it you will need to remove the grip of the 2nd HGG once you have done this cut the "grip section" of the plastic barrel of the HGG a bit shorter than an inch. (it is a bit tricky to judge but cut it a bit long then shorten or as far as you see fit )

4. once cut all you have to do is put the HGG grip back onto the cut section so it looks like the other end of your MX then push onto the thread of the RSVP barrel(if you can think of a good way of securing it to the barrel go ahead and do it but this menthod seems to work well.) and your done!


please leave coments and feed back. :) and sorry about having no pictures i will try to get a vid of it but nothing atm sorry.